Everyone

Engineering Hub

Jelly Bean

it is for learn engineering drawing which is major subject for Mechanical branch. It almost cover topics of engineering drawing chapter wise which are given below 

1.	Representative factor

2.	Plain scales

3.	Diagonal scales	

4.	construction of ellipse	

5.	construction of parabola	

6.	cycloid	

7.	epicycloid	

8.	hypocycloid	

9.	Involutes	

10.	Archimedean	

11.	logarithmic spirals

12.	Types of projection	

13.	Orthographic Projections	

14.	First and Third Angle Projections

15.	Line parallel to a plane	

16.	Line inclined to a plane	

17.	Projection of a line parallel to both HP and VP	

18.	Line perpendicular to HP & parallel to VP	

19.	Line parallel to VP and inclined to HP	

20.	Line inclined to HP and VP	

21.	Rotate the line AB to make it parallel to VP.

22.	Projections of planes	

23.	Plane surface parallel to one plane and perpendicular to the other two	

24.	Plane parallel to HP and perpendicular to both VP and PP	

25.	Plane parallel to PP and perpendicular to both HP and VP	

26.	Plane surface perpendicular to one plane and inclined to the other two	

27.	Projection of Solids

28.	Sections of Solids	

29.	Visualization of Section Views	

30.	CUTTING PLANE LINES	

31.	Placement of Cutting Plane Lines	

32.	Full Section View	

33.	Broken-Out Sections

34.	Parallel Line Development	

35.	Radial Line Development

36.	Isometric Projection	

37.	Foreshortening	

38.	Isometric Scale	

39.	Alternative Isometric Scale

Engineering Drawing

Najnowsza wersja Engineering Drawing

Inne wersje